Electronics

BSI UNITS

French Diagnostic Services have the latest Peugeot and Citroen diagnostic equipment that they use in the main dealerships, With 20 years experience on conventional 12v wiring to the latest multiplexing technologies with can,van,lin and other networks that run side by side to communicate all over the vehicle.Programming and configurations are also carried out.

New units can also be supplied. We can repair you BSI aswell if repairable.

When booking your car in always remember to bring all your keys in and your confidential code card, This is usually supplied with the vehicle when new,if you dont have one then we can obtain the transponder code from the main dealer for a charge so dont panic if you havent got it. The code is needed to programme your bsi and initialise the bsi to all the other ecus it talks to on the car,

 

ABS

ABS warning lights, Why do they come on? well the ecu checks the operating sytem at all times while you are driving through the abs sensors (pictured here on the left) calculating all the time and reporting information to the abs ecu afixed to the side of the abs hydraulic unit (pictured here bottom).If there is a problem then the light will come on, This is usually a sensor that has broken down or a wire broken.You need to put your vehicle on a diagnostic machine to see what the fault code is.

We have the Diagnostic equipment to programme the abs unit if one has to be replaced and to erase any fault codes stored in the ecu from a faullty sensor after repairs have been carried out.

Repairs to any part of the abs system on or of the vehicle are welcome,including brake bleeding and any repairs to the brakes ie discs,pads calipers

Some systems need the Diagnostic Machine to bleed the brakes so if in doubt give us a call.